Intermittent Einhell E-BH 950 SDS drill

Poorly drill repaired at FixItWorkshop

Advertisements

The owner of this drill complained that it work perfectly one minute and then stopped the next.  It was making DIY a very slow process.

IMG_3505
FixItWorkshop, April’17, Worthing, Einhell E-BH 950 SDS drill repaired

As this was a cut-out problem rather than a slowing down issue, power problems were a likely suspect.

On test, the cable flex near the base of the handle seemed to be the issue as giving it a good wiggle seemed to reproduce the fault.

Opening up the drill (several self-tapping screws) revealed a fairly straightforward layout with cord, mechanical connector, smoothing circuit (mains splash) and switch.  Having suspected the culprit to be cable flex near the handle, I cut the cable down and re-made the connection, removing the suspect part of the cable.

IMG_3503
FixItWorkshop, April’17, connector shown
IMG_3502
FixItWorkshop, April’17, broken cable removed

Despite cutting the cable flex down by about 8″, the owner was pleased with this fix since no spare parts were required and no real issues will be noticed since it will be mainly used with an extension lead.

Author: fixitworkshopblog

One of my hobbies is repairing everyday items. I like to recycle, re-use and make. My other hobbies are spannering with my car and motorbike. Just starting out in the world of blogging

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s